Konica Minolta magicolor 8650DN User Manual page 408

Troubleshooting
4
Remove the staple cartridge holder.
– Pull the staple cartridge holder toward you to remove
it.
5
Raise the shutter of the staple cartridge holder, and then
remove one sheet of staples.
6
Return the shutter of the staple cartridge holder to its original position.
7
Insert the staple cartridge holder, sliding it along the rails
in the compartment.
– Check that the staple cartridge holder is securely
inserted as far as possible.
8
Close the front door.
Reminder
If stapling still cannot be resumed, even after performing the above procedure, contact your service
representative or the manufacturer.
8650
10
10-39