Setup - Konica Minolta magicolor 8650DN User Manual

Authentication unit (IC card type AU-201)

Setup

1
Turn off the machine with the power switch, and then disconnect this device from the machine.
2
Install IC Card Driver (USB-Driver).
Plug the cable from this device into the USB port on the computer.
The Found New Hardware Wizard starts.
3
Select "Yes, now and every time I connect a device", and then click [Next].
4
Insert the application CD-ROM included with this device into the CD-ROM drive of the computer.
5
Select "Install from a list or specific location (Advanced)", and then click [Next].
8650
15
15-10