Information Checklist; Enable Http On The Machine; Access Cwis - Xerox 3635MFP - Phaser B/W Laser System Administration Manual

17 CentreWare Internet Services (CWIS)

Information Checklist

Please ensure that the following items are available or have been performed before
accessing CentreWare Internet Services (CWIS):
1. The machine should be physically connected to the network with TCP/IP enabled so
that CWIS can be accessed from a web browser.
2. An existing operational workstation with TCP/IP Internet or Intranet accessibility is
required.
3. HTTP (Hyper Text Transfer Protocol) should be enabled on the machine. HTTP is
enabled by default. If you need to enable HTTP, see Enable HTTP on the Machine on
page 160.

Enable HTTP on the Machine

Hyper Text Transfer Protocol (HTTP) must be enabled on the machine in order to access the
embedded web pages.
1. Press the <Log In/Out> button on the machine to enter the Tools Pathway.
2. Enter the Administrator's Password. The default is 1111.
3. Touch [Enter].
4. Press the <Machine Status> button.
5. Touch the [Tools] tab.
6. Touch [Connectivity and Network Setup].
7. Touch [Advanced].
8. Touch [Network Setting].
9. Touch [Network Setup].
Touch [TCP/IP Options].
10.
11. Touch [HTTP].
12. Touch [Enable].
13. Touch [Save].
14. Touch [Close] 3 times.
15. Press the <Log In/Out> button.
16. Touch [Confirm] to exit the Tools Pathway.

Access CWIS

Use these instructions to access CWIS; the embedded web pages resident in the machine.
1. Open the web browser from your Workstation.
160 Xerox Phaser 3635 System Administration Guide