Information Checklist; Use On Demand Image Overwrite At The Machine - Xerox 3635MFP - Phaser B/W Laser System Administration Manual

Systems administrator guide
Hide thumbs Also See for 3635MFP - Phaser B/W Laser:
Table of Contents

Advertisement

Standard and Full Overwrite
ODIO has the ability to perform Standard and Full Overwrites:
Standard ODIO will overwrite all jobs stored in image data as well as fax card image
data. Standard ODIO will not overwrite fax mailbox, Poll store (mailbox 0) and dial
directory information, or folders created with the Save Job for Reprint feature, if these
features are installed on the machine. Standard overwrite takes about 30 minutes.
Full ODIO will overwrite and delete all fax image data, including mailboxes, Poll store
and dial directories on the fax card. Full ODIO will also overwrite any images that have
been stored in folders created with the Save Job for Reprint feature. Full overwrite
takes approximately 160 minutes to complete.

Information Checklist

Before starting the Installation procedure, please ensure that the following item or task is
available or has been performed:
1.
Ensure that the machine is fully functioning in its existing configuration.
2.
Verify if the Image Overwrite option is enabled on your machine.
Verify if On Demand Image Overwrite is enabled on your machine
1.
At the machine, press the <Log In/Out> button.
2.
Enter the Administrator's Password. The default is 1111.
3.
Touch [Enter].
4.
Press the <Machine Status> button.
5.
Touch the [Tools] tab.
6.
Touch [User Interface].
7.
Touch [Service Enablements].
8.
Touch [On Demand Image Overwrite] button.
9.
Touch [Enable].
10.
Touch [Save].
11.
Press the <Log In/Out> button.
12.
Touch [Logout] to exit the Tools Pathway.

Use On Demand Image Overwrite at the Machine

This procedure will overwrite the image data that remains in the machine after the
completion of a job.
NOTE:
be prohibited for the duration of the overwrite.
IMPORTANT: The machine should not be in Diagnostics mode when the overwrite is
started. (The touch screen indicates a status of 'Diagnostics Mode'- this mode is used by the
Customer Service Representative when servicing the machine.)
Xerox Phaser 3635 System Administration Guide
All existing jobs, regardless of their state, shall be deleted and all job submission will
Image Overwrite Security
139

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 3635Phaser 3635mfp/sPhaser 3635mfp/x

Table of Contents