2 Machine Connection
Administrator Access
The <Log In/Out> button provides access to the Administrator Tools area. Administrator
access is required to change settings such as network information on the device.
1.
Press the <Log In/Out> button on the Control Panel.
2.
Enter the Administrator's Password. The default is 1111.
3.
Touch [Enter].
4.
Press the <Machine Status> button.
5.
Touch the [Tools] tab.
Configure Ethernet Settings
The Ethernet interface will automatically detect the speed of your network. The machine
supports hub/switch speeds of:
•
Auto
•
10 Mbps Full-Duplex
•
100 Mbps Full-Duplex
•
10 Mbps Half-Duplex
•
100 Mbps Half-Duplex
Set the Ethernet speed on the Xerox machine to match the speed set on your hub or switch:
Setting the Ethernet speed at the machine
1.
Press the <Log In/Out> button on the machine to enter the Tools Pathway.
2.
Enter the Administrator's Password. The default is 1111.
3.
Touch [Enter].
4.
Press the <Machine Status> button.
5.
Touch [Tools].
6.
Touch [Connectivity and Network Setup].
7.
Touch [Advanced].
Touch [Network Setting].
8.
8
Speed
10HD (Half-Duplex)
100HD
10FD (Full-Duplex)
100FD
Auto
Machine Setting
10HD or Auto
100HD or Auto
10FD
100FD
Auto
Xerox Phaser 3635 System Administration Guide