Transmission Using F-Codes; Communication Between Machines Supporting F-Codes; Boxes And Sub-Addresses/Passcodes Required For F-Code Transmission - Sharp MX-M202D Operation Manual

4
TRANSMISSION USING
F-CODES
This chapter explains F-code transmission, which gives you a convenient means of performing advanced operations
such as relay broadcast transmission and confidential transmission. Please read those sections that are of interest
to you.
COMMUNICATION BETWEEN MACHINES
SUPPORTING F-CODES
This machine supports the "F-code" standard as established by the ITU-T*.
Operations such as relay broadcast transmission and confidential transmission previously could only be performed
with another Sharp fax machine; however, F-Code communication makes it possible to perform these operations
with fax machines of other manufacturers that support F-Code communication.
Before using the functions explained in this chapter, make sure that the other fax machine supports F-Code
communication and has the same functions as your machine. (Note that the other machine may use different names
for some functions.)
* The ITU-T is a United Nations organization that establishes communications standards. It is a department of the International
Telecommunication Union (ITU), which coordinates global telecommunications networks and services.
BOXES AND SUB-ADDRESSES/PASSCODES
REQUIRED FOR F-CODE TRANSMISSION
"Boxes" can be created in the memory of fax machines that support F-Code communication. These boxes are used
to store faxes received from other machines and documents to be transmitted when a polling request is received. Up
to 30 boxes can be created for a variety of purposes, and a name can be assigned to each box. A "sub-address"
that indicates the box's location in memory must be programmed, and if desired, a passcode can also be
programmed to control access to the box. (A sub-address must be programmed, however, a passcode can be
omitted.)
MEMORY
0001 11245
Document
SBC CORP.
Group 1
3321
3333 4444
Department
Reports
Manager
11111111
Public Box*
*The public box is used for normal memory polling. (See "USING POLLING MEMORY" on page 38.)
52
7732123
Product Planning
7732123
Dept.
Product Planning
Dept.
1115
1115
010
Section
Manager
123456
7732123
Sub-address (location in memory)
Select any number up to 20 digits.
Product
Box name (used to manage
Planning
boxes in your machine)
Select a name of up to 36
Dept.
characters.
Passcode (key)
Select any number up to 20
digits. (Not required)
1115