Using The Polling Function - Sharp MX-M202D Operation Manual

ADVANCED TRANSMISSION METHODS

USING THE POLLING FUNCTION

When used in conjunction with the timer transmission function (page 33), only one polling job can be stored.
If the other machine is using polling security (see "Restricting polling access (polling security)" on page 40), your
Note
fax number (sender's number) must be programmed in the system settings (see "OWN PASSCODE SET" on
page 101) and your number must also be programmed in the other machine.
1
In Fax mode, press the [SPECIAL
FUNCTION] key.
When the [SPECIAL
ON LINE
DATA
SPECIAL FUNCTION] key is pressed, the
FUNCTION
special function menu appears.
(To select fax mode, see step 1
LINE
on page 17.)
COPY EXPOSURE PAPER SE
DATA
SCAN COLOUR MODE RESOLUT
2
Select "SENDING OPTIONS" with the
[ ] or [ ] key.
PQ
DED COPY
LEX SCAN
LEX SCAN
ACC
3
Press the [OK] key.
GHI
BACK OK
PQRS
4
Select "POLLING" with the [ ] or [ ]
key.
To cancel the operation
Note
During communication: Cancel as explained in "Cancelling a fax transmission" on page 25.
While the job is stored: Cancel as explained in "Cancelling a stored transmission job" on page 26.
36
SPECIAL FUNCTION
FAX PRINT HOLD
TIMER MODE
SENDING OPTIONS
SENDING OPTIONS
POLLING
SERIAL POLLING
SUB ADDRESS TX
5
Press the [OK] key.
OK
6
Enter the fax number of the other
machine with the numeric keys, press
a Rapid key, or specify a Speed Dial
number (a group key cannot be used).
To clear a mistake when
entering a full number with the
WXYZ
numeric keys, press the [C] key
to clear one digit at a time.
26 27 28
A B C
31 32 33
F G H
36 37 38
A destination selected with a Rapid key or Speed Dial
number is indicated by an icon and a number. To clear
an entry, press the [C] key.
7
Press the [OK] key.
OK
8
Press the [START] key.
MNO "Polling reservation has been
set." appears in the screen.
WXYZ
After communicating with the
@.-_
other machine, your machine
AD-END
prints the received fax.