Sharp MX-M202D Operation Manual page 84

PROGRAMMING
● Editing an F-code confidential box
11
Select the name of the F-code
confidential box that you wish to edit
with the [ ] or [ ] key.
PQ
DED COPY
LEX SCAN
LEX SCAN
ACC
If not all letters of the box name appear, press the
key to display all letters. Press the
to return to the original screen.
12
Press the [OK] key.
GHI
BACK
OK
PQRS
13
Enter the print passcode (4 digits)
with the numeric keys.
ABC DEF
GHI JKL MNO
OK
PQRS TUV WXYZ
@.-_
READ-END
ACC. #-C
Enter the correct print passcode that was programmed
when the confidential box was programmed.
14
Press the [OK] key.
15
Edit the name of the F-code
confidential box (see "ENTERING
CHARACTERS" on page 86).
• See step 9 on page 79.
• If you do not wish to edit the name, go to the
next step.
16
Press the [OK] key.
17
Edit the sub-address (maximum 20
digits) with the numeric keys.
• See steps 3 and 4 on page 69.
• If you do not need to edit the sub-address,
press the [OK] key and go to the next step.
82
S.A. CONF. BOX
SBC CO.
— — — — — —
— — — — — —
[#]:LIST DETAIL
key once again
ENTER CONF. CODE
____
(0000-9999)
18
Edit the passcode (maximum 20
digits) with the numeric keys.
• See steps 5 and 6 on page 69.
• If you do not need to edit the passcode, press
the [OK] key and go to the next step.
19
Edit the print passcode (4 digits) with
the numeric keys.
• See steps 13 and 14 on page 79.
• If you do not need to edit the print passcode,
press the [OK] key.
● Deleting an F-code confidential box
11
Select the name of the F-code
confidential box that you wish to
delete with the [ ] or [ ] key.
PQ
DED COPY
LEX SCAN
LEX SCAN
ACC
If not all letters of the box name appear, press the
key to display all letters. Press the
to return to the original screen.
12
Press the [OK] key.
GHI
BACK OK
PQRS
13
Enter the print passcode (4 digits)
with the numeric keys.
ABC DEF
GHI JKL MNO
OK
PQRS TUV WXYZ
@.-_
ACC. #-C READ-END
Enter the correct print passcode that was programmed
when the confidential box was programmed.
14
Press the [OK] key.
15
Select "DELETE" with the [ ] or [ ]
key.
16
Press the [OK] key.
You will return to the screen of step 11. If you
wish to delete another box, repeat steps 11
through 14. To exit, press the [BACK] key.
S.A. CONF. BOX
SBC CO.
— — — — — —
— — — — — —
[#]:LIST DETAIL
key once again
ENTER CONF. CODE
____
(0000-9999)