Sharp MX-M202D Operation Manual page 58

TRANSMISSION USING F-CODES
Checking and clearing document data in a box
The procedures for checking document data in an F-code polling memory box by printing the data and for clearing
the data are generally the same as in "Printing documents in the Public Box" (page 39) and "Deleting documents
from the Public Box" (page 40).
1
Perform steps 2 through 4 of
"Scanning a document into polling
memory (the Public Box)" on page 38.
2
Select "S.A.M-POLL ORIG" with the
[ ] or [ ] key.
PQ
DED COPY
LEX SCAN
LEX SCAN
ACC
3
Press the [OK] key.
GHI
BACK OK
PQRS
4
Select the name of the F-code memory
polling box with the [ ] or [ ] key.
A checkmark appears next to the box name of boxes
that have document data.
If not all letters of the programmed name appear,
press the key to display all letters. Press the
again to return to the previous display.
5
Press the [OK] key.
OK
56
SELECT READING
MEMORY POLLING
S.A.M-POLL ORIG
SEL S.A. POLL BX
Document Plan
Document Tech
- - - - - -
[#]:LIST DETAIL
key
6
Select "PRINT" or "DELETE" with the
[ ] or [ ] key.
If you selected "PRINT", press the [OK] key to begin
printing.
If you selected "DELETE", go to step 7.
7
Press the [OK] key.
OK
A screen appears asking you to confirm the deletion.
8
Select "YES" with the [ ] or [ ] key.
To cancel the deletion, select "NO".
9
Press the [OK] key.
The documents are deleted
OK
from the F-code polling memory
box.
Deletion is not possible while the box is
Note
being used.
ORIGINAL
ADD
CHANGE
DELETE
PRINT
DELETE
YES
NO
DELETE
YES
NO