Viewing Product and Fabric Data
Note:
you may want to reload the page, because it will not update automatically after the
initial view is loaded.
Parts of the Product Cell
The product cell has the following parts:
Product Cell Information
Each product cell provides information about a device on the fabric as described
in
Table
Table 6: Information on the Product Cell
Information
Domain ID
WWN
IP
112
If the message Attempting to Collect Data displays in a product cell,
A graphic representation of the device and its status. For more information,
see
"Parts of the Product
Information about the device. For more information, see
Information" on page 112
View Topology text that acts as a hyperlink to the Topology page for the
fabric (firmware 04.00.00 and higher only). Choose this hyperlink to view the
Topology page. (The hyperlink is found only on the Edge Switch 2/16, Edge
Switch 2/32, Edge Switch 2/24, SAN Director 64, Director fc-64,
Director 2/64, and Director 2/140.) Other HP switches and non-HP products
do not have this hyperlink.
6.
Domain ID of the product
used in the fabric.
WWN of the product used in
the fabric.
IP addresses of the product.
Graphic" on page 113.
Description
"Product Cell
Availability
Available for any product.
Available for any product.
HP high availability fabric
directors and switches only.
Embedded Web Server User Guide