HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 93

Note:
4. Type the zone name and click Add New Zone. After the name is validated,
5. To add devices (members) to the zone, click the zone name (Zone-1). The
Embedded Web Server User Guide
The first character of a zone set name must be a letter
(A through Z or a through z).
A zone set name cannot contain spaces.
Valid characters are alphanumerics and the caret ( ^ ),
hyphen ( - ), underscore ( _ ), or dollar ( $ ) symbols.
A zone set name can have a maximum of 64 characters.
A product can have a maximum of 1024 zones.
the new zone name (Zone-1) and an associated Delete button display at the
bottom of the page. Note the following:
Save and activate the zone — Changes to a zone or zoning configuration
are not saved and activated on the product until saved as part of a zone
set. See "Configuring Zone
performing this function.
Delete all zones — To delete all configured zones and zone members,
click Delete All Zones. A confirmation dialog box displays. Click OK to
delete all zones.
Delete a single zone — To delete a single zone and its zone members,
click the Delete button adjacent to the zone name. A confirmation dialog
box displays. Click OK to delete the zone.
Display more zones — If a zone set contains more than 64 zones, the
Display More Zones link activates to display subsequent pages. In
addition, the Display Previous Zones link activates on subsequent
displayed pages.
Modify Zone tab view displays
Sets" on page 96 for information about
(Figure 24).
Configuring Zones
93