HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 48

Configuring the Product
Note:
3. Click Activate to save and activate the changes. The following message
48
c. Select a Fibre Alliance Management Information Base (FA MIB) version
in the FA MIB Version field. The options are FA MIB 3.0 and FA MIB
3.1. This should be set to match the level of FA MIB used by the SNMP
management stations that access the product.
d. For each trap recipient to be configured, type a community name of 32
alphanumeric characters or less in the Community Name field. The
community name is incorporated in SNMP trap messages to prevent
unauthorized viewing or use.
Spaces are allowed in the Community Name field.
e. Click the check box in the Write Authorization column to enable or
disable write authorization for the trap recipient (default is disabled). A
check mark indicates write authorization is enabled. When the feature is
enabled, a management workstation user can change sysContact,
sysName, and sysLocation SNMP variables.
f. Type the IP address or DNS host name of the trap recipient (SNMP
management workstation) in the Trap Recipient field in four-byte,
dotted-decimal format. It is recommended the IP address be used.
g. The default UDP port number for trap recipients is 162. Type a decimal.
The range for the UDP port number value is 1 to 65535.
displays: Your changes to the SNMP configuration have
been successfully activated.
Embedded Web Server User Guide