HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 139

Note:
be reset by browsing through the Configure page and associated tabs.
If the product configuration is reset, management access of the product may be
lost until the network information is restored. The product must be offline before
the configuration can be reset. See
instructions on setting the product offline.
Note:
values, the Ethernet link between the product and the service processor may drop and
not reset. Make sure you record the product's current IP address as you will want to
enter that value in the IP Address field, under the Configure page, Switch or Director
tab, and Network tab. See
instructions.
Note:
information page as described in
Save the product information page to a file or print the page to verify the changes you
made and to identify the default values.
Embedded Web Server User Guide
Before resetting the product, you may want to review the kinds of data that will
Since the current IP address for the product may not match the factory default
"Configuring Network
After you reset the product configuration, you should view the product
Operating and Managing Products and Parts
step 2 in "Configuring
Information" on page 45 for
"Obtaining Product Information" on page 148.
Ports" on page 31 for
139