HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 97

Configuring Zones
Enable or disable default zone — To toggle (enable or disable) the
default zone state, click Enable Default Zone or Disable Default Zone.
Depending on the toggle state, the Default Zone field changes to
Enabled or Disabled.
Disable zone set — To disable the active zone set and place all attached
devices in the default zone, click Disable Zone Set. A confirmation
dialog box displays. Click OK to disable the active zone set.
Discard changes — To discard unsaved changes made to a zone set
configuration and revert to a saved zoning configuration, click Discard
Changes. A confirmation dialog box displays. Click OK to discard the
changes.
Embedded Web Server User Guide 97