Enabling And Disabling Switch Binding - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Enabling and Disabling Switch Binding

Note:
For more information, see
page 72.
To enable or disable Switch Binding:
1. Select Configure from the navigation panel.
2. Select the Security tab and the Switch Binding tab. The Switch Binding tab
Embedded Web Server User Guide
WWNs can be added to the SBML without regard to whether Switch Binding
is enabled or disabled.
If the director or switch is online and Switch Binding is not enabled, all nodes
and switches attached to the director or switch are automatically added to the
SBML.
Switch Binding can also be enabled by enabling the Enterprise Fabric Mode.
view displays (Figure
"Switch Binding and the Enterprise Fabric
16).
Configuring the Product
Mode" on
59