Laser Safety; Certification And Classification Information; Product Information - HP Brocade 4Gb SAN Installation Manual

Compliance with these directives implies conformity to applicable harmonized European
standards (European Norms) which are listed on the EU Declaration of Conformity issued by
Hewlett-Packard for this product or product family.
This compliance is indicated by the following conformity marking placed on the product:
This marking is valid for non-Telecom products
and EU harmonized Telecom products (e.g. Bluetooth).

Laser safety

A. Certification and classification information
This product contains a laser internal to the small form-factor pluggable (SFP) transceiver
modules.
In the USA, the SFP module is certified as a Class 1 Laser product, conforming to the
requirements contained in Department Of Health and Human Services (DHHS) regulation 21
CFR, Subchapter J. The certification is indicated by a label on the metal SFP housing.
Outside the USA, the SFP is certified as a Class 1 Laser product conforming to requirements
contained in IEC 825-1:1993 and EN60825-1:1994, including Amendment 11:1996.
The SFP includes the following certifications:
• UL Recognized Component (USA)
• CSA Certified Component (Canada)
• TUV Certified Component (European Union)
• CB Certificate (Worldwide)
• The following figure shows the Class 1 information label that appears on the metal
housing of the SFP.
CLASS 1 LASER PRODUCT 21 CFR(J)
B. Product information
Each communications port consists of a transmitter and receiver optical subassembly. The
transmitter subassembly contains internally a semiconductor laser diode in the wavelength of
either 850 nanometers (shortwave laser) or 1310 nanometers (longwave laser).
Class 1 Laser products are not considered hazardous.
46 Regulatory compliance notices
xxxx
This marking is valid for EU non-harmonized Telecom products .
*Notified body number (used only if applicable - refer to the product label)
*