HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 95

7. Changes to a zone, zoning configuration, or zone member are not saved and
8. Up to 64 zones may be displayed on a single page. If a zone set has more than
Embedded Web Server User Guide
Add member by WWN — Type the WWN of a device in the World
Wide Name field and click the adjacent Add Member button. The device
is added to the zone.
Add member by domain ID and port number — Type the domain ID
(1 through 31) of the switch in the Domain ID field, type the switch port
number to which a device is attached, and click the adjacent Add
Member button. The device attached to that port is added to the zone.
Delete a member — To delete a zone member, click the Delete button
adjacent to the configured zone member (WWN or domain ID and port
number) at the bottom of the page. A confirmation dialog box displays.
Click OK to delete the zone member.
activated on the switch until saved as part of a zone set. See
Zone Sets" on page 96 for information about performing this function.
64 zones defined, you can display additional pages by choosing Display
Previous Zones or Display More Zones. These fields are grayed out if there
are 64 or fewer zones defined for a zone set.
Configuring Zones
"Configuring
95