Viewing The Link Incident Log; Link Incident Log View - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Viewing the Link Incident Log

Select Monitor on the navigation panel. Select the Logs tab; the Logs tab view
displays. Select the Link Incident Log link. The Link Incident Log displays in
text format, as shown in
window. Close the browser window to close the log.
Figure 38: Link Incident Log View
The Link Incident Log provides the following information about link incidents:
Embedded Web Server User Guide
Figure
Date/Time — Date and time when the link incident event occurred.
Port — The port on which the link incident occurred.
Link Incident Event — An ASCII string describing the link incident
event. The following events may cause a link incident to be written to the
log:
— Implicit incident. The attached node detects a condition that may
cause problems on the link.
— Bit-error threshold exceeded. The number of code violation errors has
exceeded the specified threshold.
— Loss-of-signal or Loss-of-synchronization. This occurs if a cable is
unplugged from an attached node. Loss-of-signal occurs when a cable
is unplugged from an attached node. Loss-of-synchronization is
reported if the condition has persisted for longer than the resource
allocation time out value (R_A_TOV).
— Not-operational (NOS) primitive sequence received.
— ------Primitive sequence timeout:
— ------Link reset protocol timeout occurred.
38. The log displays in a separate browser
Monitoring Products
131