HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 173

Table 9: Embedded Web Server Messages (Continued)
Error 225: Argument
Does Not Contain All
USASCII Characters
Error 226: Argument Is
Too Long
Error 227: Invalid SNMP
Community Name
Error 228: Invalid Write
Authorization Argument
Error 229: Invalid UDP
Port Number
Error 230: Invalid WWN
Error 231: Invalid Port
number
Embedded Web Server User Guide
Message
The argument contains
non-USASCII characters.
One or more parameters
are invalid for this
command.
The value entered for the
SNMP community name
is invalid
The write authorization
parameter does not
contain a valid value.
The udpPortNum
parameter does not
contain a valid value.
The wwn parameter does
not contain a valid value.
The portNum parameter
does not contain a valid
value.
Description
Error Messages
Action
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
The community name
must not exceed 32
characters in length.
Duplicate community
names are allowed, but
corresponding write
authorizations must
match. Enter an
appropriate SNMP
community name and
resubmit.
Parameters must be typed
exactly to specification to
be recognized correctly.
Parameters must be typed
exactly to specification to
be recognized correctly
by the system.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
173