Enabling Or Disabling The Cli - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual
Fw v06.xx/hafm sw v08.02.00 hp storageworks embedded web server user guide (aa-rtdrc-te, july 2004)
Hide thumbs
Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
- Service manual (322 pages) ,
- User manual (300 pages) ,
- Reference manual (214 pages)
Table of Contents
Advertisement
Enabling or Disabling the CLI
Perform this procedure to enable or disable the state of the product's command
line interface (CLI). To change the CLI state:
1. Choose Configure from the navigation panel.
2. Click the Management tab and the CLI tab. The CLI tab view displays
Figure 12: Disabling the CLI
3. Perform one of the following steps as required:
Embedded Web Server User Guide
(Figure
12).
a. Click Enable to activate the CLI. The following message displays: Your
changes to the CLI enable state have been
successfully activated.
b. Click Disable to deactivate the CLI. The following message displays:
Your changes to the CLI enable state have been
successfully activated.
Configuring the Product
49
Advertisement
Table of Contents
