HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 176

Fw v06.xx/hafm sw v08.02.00 hp storageworks embedded web server user guide (aa-rtdrc-te, july 2004)
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

Error Messages
Table 9: Embedded Web Server Messages (Continued)
Error 245: Invalid
increment value
Error 246: Invalid interval
value
Error 247: Invalid counter
number
Error 248: A counter
must be assigned to this
threshold alert
Error 249: At least one
port or port type must be
added to this threshold
aler
Error 250: Invalid counter
threshold alert name
Error 251: The threshold
alert must be disabled
Error 252: Not Allowed
While the Pending Fabric
Binding State is Set to
Inactive
176
Message
t
Description
The increment value
specified is not between 1
and 70560.
The interval value
specified is not between 5
and 70560 minutes.
The counter specified is
not a valid number.
A counter must be
assigned to an alert
before it is enabled.
A port or port type must
be assigned to an alert
before it is enabled.
The name specified for
the alert is not valid.
The counter threshold
alert to be
modified/deleted is
already enabled.
The pending fabric
binding set must be set to
in order to
Restrict
edit the pending fabric
binding list.
Action
Make sure the increment
value given is between 1
and 70560.
Make sure the increment
value given is between 5
and 70560 minutes.
Use the table shown by
the command
perf.counterThre
shAlerts.showSta
tisticsTable
find a valid counter
value.
Use the
perf.counterThre
shAlerts.setCoun
command to set a
ter
counter before the alert is
enabled.
Use the
perf.counterThre
shAlerts.addPor
command to add a port
before the alert is
enabled.
A counter threshold alert
with the specified name
does not exist.
Disable the threshold
alert and then try the
command again.
Set the pending fabric
binding state to
.
Restrict
Embedded Web Server User Guide
to
t

Advertisement

Table of Contents
loading

Table of Contents