Edit An Entry On The Radius Server List; Delete An Entry From The Radius Server List; Configure Priority Of The Radius Servers - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring the RADIUS Server
5
Edit an Entry on the
RADIUS Server List
Delete an Entry from
the RADIUS Server
List
Configure Priority of
the RADIUS Servers
EFCM Basic User Manual
5-20
• Timeout (sec)—Specify the amount of time to wait for a response
from the RADIUS server before re-transmitting information. The
time-out value can be in the range 1 to 1000 seconds; the default is
4 seconds.
• Attempts—Specify the number of times an access-request packet
is resent to a RADIUS server if a response is not received before
the time-out. After the attempts limit is reached, the Gateway
switches to the next server. The value can be 1 to 100 attempts;
default is 3 attempts.
Select the OK button to add the entry to the RADIUS Server list.
To edit the configuration information for an entry in the RADIUS
Server list, select an entry from the list in the Radius Server area of the
RADIUS Server page. Select the Edit button. The information for the
RADIUS Server is shown in the Radius Server Properties area of the
page.
You can change values of the parameters for the RADIUS Server as
described in
Add an Entry to the RADIUS Server List
Select the OK button to populate your changes to the RADIUS Server
list.
To remove a RADIUS Server from the database, select the RADIUS
Server from the list and select the Delete button. When deleting an
entry from the list, the remaining servers in the list are moved to a
higher priority.
To remove all RADIUS Servers from the list, select the Delete All
button.
Entries in the Radius Server part of the page are shown in order of
priority. The first entry has the highest priority; the second entry is
next. Priority corresponds to the order in which the product uses the
server for authentication. The highest priority entry is contacted first
during a login attempt. If that server is unavailable, the next highest
priority server is contacted.
To change the priority of entries in the RADIUS Server list, select an
entry from the list in the Radius Server area of the RADIUS Server
page. Use the arrow buttons to raise or lower the priority of the
selected entry.
on page 5-19.