McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 217

Message Error 114: Invalid CLI Enabled State
Internal error.
Description
Informational only.
Action
Message
Error 115: Invalid Switch Speed
The request cannot be completed because the switch is not capable of
Description
operating at the configured speed.
Consult the installation/service manual to determine the speed
Action
capabilities of your product.
Message
Error 116: Switch Not Capable of 2 Gb/sec
The request cannot be completed because the switch is not capable of
Description
operating at 2 Gb/sec.
Consult the installation/service manual to determine the speed
Action
capabilities of your product.
Message
Error 117: Port Speeds Cannot be Set at Higher Data Rate than
Switch Speed
This request cannot be completed because the requested port speed is
Description
faster than the currently-configured switch speed.
The switch speed should first be configured to accommodate changes
Action
in the configured port speed. The ports cannot operate at a faster rate
than the switch, itself. Update the switch speed and re-submit the
request.
Message Error 118: Invalid Port Speed
This request cannot be completed because the requested port speed is
Description
not recognized for this product.
Port speeds may be set to 1 Gbps or 2 Gbps. Update the port speed
Action
and re-submit the request.
A-23