Product Boxes - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Product Boxes

cannot be expanded or contracted. The listings in the fabric tree
provide the following information, for the current product and the
next two domain IDs:
• Domain ID —This field is a link that opens the Product Hardware
page for the corresponding device.
• WWN—World Wide Number (WWN) of the switch/domain.
• IP—IP address of the switch/domain.
• Paths to Destination—The number of paths to this
product/domain ID from the perspective of the product you are
logged into.
• Hop Count—Number of network hops to this product/domain ID
from the perspective of the product you are logged into.
• Status—Operational status of the switch.
Listings for domain IDs other than the three products do not contain
the above information.
The links for these domain IDs forward the user to the Upgrade page,
because, if your SAN contains more than three devices, the EFCM
Basic interface may not be appropriate for your SAN management
requirements. (For a description of the Upgrade page, see
Upgrade and Feature Installation
To access devices not shown in the page, you must login using the IP
address of a device that has a domain ID that will result in the
information you want to view.
The Fabric View page can display a maximum of nine product boxes.
The order of devices shown on this page is numeric by domain ID,
starting with the domain ID belonging to the IP address that was
logged into by the user. All other devices are shown in the Fabric
Tree, but are not available as Product Boxes.
To access devices not shown in the page, you must login using the IP
address of a device that has a domain ID that will result in the
information you want to view.
Up to nine products display in the boxes on the right side of the page.
The box of the current switch is shaded green. The following
information is displayed for these products:
• Domain ID—Domain ID of the corresponding device.
on page 9-1.)
Using the Fabric View
Fabric View Elements
8
Software
8-3