Add An Entry To The Radius Server List; Radius Server Page - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual
Fw 08.01.00 mcdata efcm basic user manual (620-000240-000, november 2005)
Hide thumbs
Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
- Manual (684 pages) ,
- Installation and service manual (612 pages) ,
- User manual (380 pages)
Table of Contents
Advertisement
Figure 5-6
Add an Entry to the
RADIUS Server List
RADIUS Server Page
The RADIUS Server list shows the RADIUS Servers the product is
configured to use for authentication. The RADIUS Server list can
have a maximum of three entries.
To create an entry in the RADIUS Server list, select the New button.
The Radius Server Properties area becomes active. Specify values for
the parameters in this area as follows:
•
IP Address—Specify an IP address for the RADIUS Server.
•
New Key—Enter a key that is consistent with the key on the
RADIUS server. This can be a key of 1 to 255 characters in length.
•
Confirm Key—Enter the value entered in the New Key field.
•
UDP Port—Specify a UDP Port number. The default port number
is 1812.
Configuring the RADIUS Server
Configuring Security
5
5-19
Advertisement
Table of Contents
