Health Status Information - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Health Status
Information
• ISL connection not allowed on this port
• ELP rejected by the attached switch
• Incompatible switch at other end of the ISL
• External loopback adapter connected to the port
• N_Port connection not allowed on this port
• Incompatible non-McDATA switch at other end of the ISL
• ISL connection not allowed to external Fabrics
• Port binding violation - unauthorized WWN
• Unresponsive node connected to Port
— If Operational State is Inactive:
• No Serial Number
• No Key Enabled
• Switch Speed Conflict
• Optics Speed Conflict (64-Port and 140-Port Directors only)
• No SBAR Support (64-Port and 140-port Directors only)
If you select the entry for a port in the Health Status column,
Predictive Optics Monitoring (POM) information displays. POM data
for the selected port appears in the lower part of the page:
• Port Number—Product port number.
• Health Status—Condition of the installed optical transceiver
(Normal, Warning, Alarm, or No Info).
• Transceiver Type—Installed transceiver type (SFP, XFP, or
Unknown).
If the port has a digital diagnostics (DD) enabled optical transceiver
installed, product firmware displays a table of reported temperature,
voltage, current, transceiver power, and receiver power
on page 2-10). Optical transceivers also provide vendor-specific
threshold values for these parameters.
Viewing the Port List
(Figure 2-3
Viewing Product Information
2
2-9