Configuring Port Authentication; Port Authentication Configuration Page - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring Port Authentication

5

Configuring Port Authentication

EFCM Basic User Manual
5-14
The Port Authentication page allows a user to override the
authentication settings of the product for specified ports. The page
shows a list of ports, their WWN (if applicable), and their
authentication state.
To configure authentication for a port, perform the following
procedures:
1. Select Security > Authentication Settings on the navigation panel,
then select the Port tab. The Port Authentication configuration page
(Figure

Port Authentication Configuration Page

Figure 5-4
2. Select the port or ports for which you will change authentication
configuration.
3. Specify the authentication state for the port by selecting one of the
following buttons:
• Default—Specifies that the port use the authentication setting
that is active for the product.
• Enable—Specifies that authentication is enabled for the port.
5-4) displays.