Resetting Ports
7
Resetting Ports
Select Maintenance > Ports > Reset from the navigation panel. The
Ports Reset page displays
(Figure
7-3). Use this page to reset ports.
This action clears all statistics counters and disables port beaconing
for the port. If a product is attached to the port and is online, this
operation sends a link reset to the attached product; otherwise, this
action disables port beaconing on the port. If the port is in a failed
state, such as after failing a loopback test, the reset restores the port to
an operational state and clears the service required (amber) LED. The
reset does not affect other ports in the product.
Port Reset Page
Figure 7-3
To reset a port, select the corresponding check box in the Reset
column. To activate your changes on the product, select the OK
button.
EFCM Basic User Manual
7-6