McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 216

Message
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
EFCM Basic User Manual
A-22
Error 108: Invalid TTA Type
The type of the throughput threshold alert has not been set.
Set the type of the TTA, then try to activate the alert.
Error 109: Invalid CTA Type
The type of the counter threshold alert has not been set.
Set the type of the CTA, then try to activate the alert.
Error 110: Invalid Percent Utilization
The type of the throughput threshold alert has not been set.
Set the type of the TTA, then try to activate the alert.
Error 111: Invalid Threshold Type
The type of the threshold alert is not valid.
Configure the type of the throughput threshold alert to one of the
types found in the enumerated table for TTAs.
Error 112: No Threshold Definition Given
The threshold value for the alert was not configured before the user
attempted to activate the alert.
Set the threshold value, then try to activate the alert.
Error 113: Invalid EWS Enabled State
Internal error.
Informational only.