McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 215

Message Error 103: Port Diagnostic In Progress
The request cannot be completed because a port diagnostic is
Description
running.
Wait for the diagnostic to complete.
Action
Message
Error 104: System Diagnostic In Progress
The request cannot be completed because a system diagnostic is
Description
running.
Wait for the diagnostic to complete.
Action
Message
Error 105: Max Combination of Threshold Alert Definitions
Reached
The maximum number of total threshold alerts has already been
Description
reached.
Remove a threshold alert before adding the new threshold alert. A
Action
total of 16 counter and throughput threshold alerts is allowed.
Message
Error 106: Invalid Threshold Scope
The scope of a threshold alert is not set to a valid state before the user
Description
activates an alert.
Set the scope of the threshold alert, then try to activate the alert.
Action
Message
Error 107: Invalid Threshold State
The state of a threshold alert must be set before the user activates an
Description
alert.
Set the state of the threshold alert, then try to activate the alert.
Action
A-21