Configuring User Authentication; Adding, Editing, And Deleting User Names - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring User Authentication

5

Configuring User Authentication

Adding, Editing, and
Deleting User
Names
EFCM Basic User Manual
5-2
• Devices tab—Configuring Device Authentication
• Ports tab—Configuring Port Authentication
The User Authentication configuration page (the default landing page
when clicking on the Authentication Settings menu item) allows the
EFCM Basic user to configure authentication settings for users of the
product's embedded management interfaces, EFCM Basic and the
CLI. This page configures all user names for EFCM Basic and the CLI.
The page has the following parts:
• Existing Users—A list of the user names currently configured for
the product, which is documented in
on page 5-2.
User Names
• User Properties—An interface used to configure the properties of
the user name, which is documented in
page 5-4.
• Authentication Settings—An interface used to configure the
authentication settings used for the EFCM Basic (web) interface
and the CLI, which is documented in
Settings for the Product
To add, edit and delete user names, use the Existing Users area of the
Users Authentication page. Select Security > Authentication Settings on
the navigation panel, then select the Users tab. The Users
Authentication configuration page
on page 5-14
Adding, Editing, and Deleting
Defining User Properties
Defining Authentication
on page 5-5.
(Figure 5-1) displays.
on page 5-10
on