Switch Maintenance Tasks
7
Switch Maintenance Tasks
Set the Product
Online State
EFCM Basic User Manual
7-2
The Switch maintenance page enables you to configure a number of
settings for the product on one page.
Select Maintenance > Switch on the navigation panel. The Switch
maintenance page
Switch Maintenance Page
Figure 7-1
The Switch maintenance page enables you to perform the following
tasks:
•
Set the online state of the product, which is described in
Product Online State
•
Set the unit beaconing state of the product, which is described in
Set the Unit Beaconing State
•
Clear system error lights for the product, which is described in
Clear System Error Lights
•
Perform a system configuration reset for the product, which is
described in
Using the Switch maintenance page, you can set the product online,
which means it can communicate with the fabric; or set it offline,
which means that it cannot communicate with other devices.
The product's online status is shown in the Current Online State field.
If the value shown is On, you can set the product offline by selecting
the Deactivate button.
(Figure
7-1) displays.
on page 7-2.
on page 7-3.
on page 7-3.
Perform a System Configuration Reset
Set the
on page 7-3.