Enabling And Disabling Safe Zoning Mode - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Enabling and Disabling Safe Zoning Mode

5

Enabling and Disabling Safe Zoning Mode

EFCM Basic User Manual
5-34
• Enter the WWN to which the port is to bind in the Bound
WWN column. The WWN must be entered as hex digits, all
uppercase, and you must use a colon to separate digits.
• Click the check box in the Attached column. This option is
valid only if a WWN is present in the Attached WWN column
for the port. (The Attached WWN column indicates the WWN
that is currently attached to the port, but is not bound to it.)
ATTENTION! If the Port Binding check box is checked, and a WWN is not
specified for binding, no devices can attach to the port.
3. Click the OK button at the bottom of the screen to activate the
configuration changes.
Perform this procedure to enable or disable Safe Zoning Mode for the
product. When this option is selected, zone merges are prohibited
and default zoning is prohibited, if the zone name and zone members
in the zone set are not identical.
To enable the Safe Zoning Mode, select the Safe Zoning Mode check
box on the Security menu
Mode, clear the Safe Zoning Mode check box on the Configure menu.
Security Menu
Figure 5-11
(Figure 5-11). To disable the Safe zoning