Suggested Reading; Where To Start - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Suggested Reading

1

Suggested Reading

Where to Start

EFCM Basic User Manual
1-6
A book that can help you install products and configure a SAN is the
McDATA Products in a SAN Environment Planning Manual
(620-000124). You can obtain this book from the McDATA web site
(www.mcdata.com) or from the documentation CD shipped with the
McDATA product you purchased.
Another publication you may want to read is An Introduction to
Zoning, which is a white paper on zoning fundamentals. It is
available online from the McDATA web site at www.mcdata.com.
If the product has not been installed, you should start at
Viewing Product Information.
If the product was installed, then many of the configuration tasks
were already completed. In that case, you may need to configure a
zone. Configuring (including adding, deleting, and changing) zones
is described in Chapter 4, Configuring Zoning
If the products have been configured and you have a functioning
SAN, then you most likely will be interested in performing system
administration tasks. Those tasks are described in
Chapter 5, Configuring
Configuring Zoning,
Viewing System Logs.
If you need to perform troubleshooting, then you will want to review
Chapter 5, Configuring Security, and
Chapter 2,
Chapter 4,
Security, and, Chapter 6,
Chapter 6, Viewing System
Logs.