McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 236

Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
Message
Description
Action
EFCM Basic User Manual
A-42
For the appropriate parameters, see the section of the manual that
corresponds to the attempted command. Parameters must be typed
exactly to specification to be recognized correctly.
Error 231: Invalid Port number
The portNum parameter does not contain a valid value.
For the appropriate parameters, see the section of the manual that
corresponds to the attempted command. Parameters must be typed
exactly to specification to be recognized correctly.
Error 232: Invalid Domain ID
The domainID parameter does not contain a valid value.
For the appropriate parameters, see the section of the manual that
corresponds to the attempted command. Parameters must be typed
exactly to specification to be recognized correctly.
Error 233: Invalid Member
The zone member added is not valid.
For the appropriate parameters, see the section of the manual that
corresponds to the attempted command. Parameters must be typed
exactly to specification to be recognized correctly.
Error 234: Invalid Command
The system cannot associate an action with the submitted command.
The command may be misspelled, required parameters may be
missing, or the request may not be applicable to the branch of the CLI
tree from which it was submitted.
Consult the documentation for the command to be sure this
command was entered correctly, all parameters are valid and
present, and that the syntax is correct.