Authentication Settings on the navigation panel, then select the
Software tab. The Software configuration page
Software Authentication Configuration Page
Figure 5-2
The Permitted Management Software list shows authenticated
out-of-band software identifiers (such as NMRU connections to the
switch). Add, edit, and delete the software packages as follows:
•
Add a software package by selecting the New button. Use the
Software Member area to configure settings for the software as
described in
page 5-8.
•
Edit a listed software package by selecting the software ID from
the list, then selecting the Edit button. Use the Software Member
area to configure settings for the software as described in
Configuring Software Authentication Properties
•
Delete a software package by selecting the software ID from the
list, then selecting the Delete button. To delete all listed software,
select the Delete All button.
Configuring Software Authentication Properties
Configuring Software Authentication
(Figure
5-2) displays.
on
on page 5-8.
Configuring Security
5
5-7