McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 249

Fw 08.01.00 mcdata efcm basic user manual (620-000240-000, november 2005)
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

The preferred path is invalid; one reason may be that the Domain ID
Description
is the same as the local switch ID.
Enter a valid preferred path and ensure the Domain ID is not the
Action
same as the local switch ID.
Message
304: RADIUS Authentication Present. Cannot Remove All RADIUS
Servers.
You cannot remove all of the RADIUS server configurations if you
Description
have enabled RADIUS authentication.
Disable RADIUS authentication on all interfaces (such as CLI and so
Action
on) and then remove the last RADIUS server.
Message
305: OSMS Management State must be Enabled.
You cannot enable CT Outgoing Authentication when Open Systems
Description
Management Server is disabled.
Enabled Open Systems Management Server before enabling CT
Action
Outgoing Authentication.
Message
306: CT Outgoing Authentication is Enabled.
You cannot disable Open Systems Management Server when CT
Description
outgoing authentication is enabled.
Disable CT outgoing authentication before disabling Open Systems
Action
Management Server.
Message
307: The Preferred Path Does Not Exist.
You tried to clear a path that does not exist.
Description
Verify the path you attempted to clear exists.
Action
A-55

Advertisement

Table of Contents
loading

Table of Contents