Media/Color Options - For Default Document Settings - Xerox 850DX - Phaser Color Solid Ink Printer User Manual

Media/Color Options – for Default Document Settings
Navigational Paths:
Default Options: Go to Document Submit Tab> Edit Default
Options Button> Media Tab
Single Document Options: Go to Document Submit Tab> double
click a document title> Media Tab
The Media Tab is where you choose what media size, media type, color, and
media source should be used for your documents that will print out as
separate documents, or on one media using plot nesting.
AccXES Client Tools User Guide
Media Size – Choose the media size appropriate for your print job. The ANY
media selection enables the printer to select the best media size based on
the size of the image and the media installed in the printer. When a specific
paper size is selected, then "Scaled to fit" is added as an option in the Scaling
drop down menu, on the Transformation Tab.
NOTE: Also be sure that your selected media size is loaded in the printer.
Media Type – Click on this list box to select the media type. The choices
depend upon the device selected on the Device Manager Tab. Selecting Any
allows the printer to use any media type when printing this document. The
default setting is Bond for monochrome printers and Any for color printers.
NOTE: AccXES firmware does not fold vellum or film media. If they are
specified as your media type on the Document Setup Tab, and if a folder is
going to be used for the print job, then a warning message will appear when
you try to send the print job to the printer.
Media Source – Select the printer's drawer location of the media that you
want used for your print job. If you select "Automatic Selection", the printer
will select the widest roll installed in the printer to print the desired media size,
rotating the image if needed. If you select a specific size roll, the Media Type
and Media Size fields on this screen will be disabled.
47