Xerox 850DX - Phaser Color Solid Ink Printer User Manual page 65

Folder Options let you specify whether you want your prints folded, and
which folding method to use when folding is requested. (Folding selections
are only for monochrome printers with an attached folder.)
NOTE: To avoid paper jams, use only bond media with the AccXES folder.
AccXES firmware does not fold vellum or film media. If they are specified as
your media type on the Document Setup Tab, and if a folder is going to be
used for the print job, then a warning message will appear when you try to
send the print job to the printer.
Folder Type – Select the type of folder that is connected to the printer which
you have selected on the Device Manager Tool. If it is not listed, do the
following to add that type of folder to the Folder Type list.
Ÿ
Select Add Folder.
Ÿ
On the "Select a Finisher" screen, locate the .FIN file for your folder type.
The .FIN file is located where your ACT software is installed (e.g. Program
Files/AccXES/ACT 10.0/etc/finisher/Name of finisher you want to install.)
Click OK. The folder will be added to the Folder Type list.
NOTE: Go to Appendix 1 if you need to know how to create a FIN file for your
folder.
The appropriate folder methods for that type will be listed in the Folder Method
drop down menu. The last folder that has been added by the user will remain
in this Folder Type menu between sessions of using the AccXES Client Tools.
Folder Method - Click on the down arrow
options available to you with the type of folder that is connected to your
printer. The default is whatever is set on the Web PMT. The selection is
limited to Folder Bypass when the folder equipment is not installed. A brief
description of the finisher program is given at the bottom of the Finishing tab.
Sort Bin - Select which bin the folder should use.
Title Block - Select where the title blocks are located on your documents
so that they will be on the top after the job is folded.
AccXES Client Tools User Guide
to display the list of folding
Intelligent Title Block - (If you are accessing a printer that is using an
AccXES Firmware version of 9.0 or greater.)
For folding documents with title blocks in standard corners: Check the
Intelligent Title Block box to adjust the location of the title block so that it
is visible once the document is folded.
For folding documents with title blocks that are not in an expected
standard corner: Leave the Intelligent Title Block box unchecked.
The following check boxes indicate additional folder features that may be
available with your folder.
Cross Fold – The printed media will be folded in half at the end of the
folding process.
Margin – A margin will be left on one edge of the folded document (such
as, to punch holes in it to fit the printout into a notebook without punching
holes through the entire document).
Punch – Holes will be punched in the folded printout.
Tab/Reinforcing – A reinforcing strip will be added to an edge of the
folded document.
65