Xerox 850DX - Phaser Color Solid Ink Printer User Manual page 55

Fineline Grayscale Rendering - Select either Contone or Black as the
parameter to specify how fine lines should be rendered when the Render
Mode is set to Grayscale. In Grayscale Render Mode, fine lines that are
drawn in a light luminance color, such as yellow, will appear very light if
this parameter is set to Contone. Setting this parameter to Black will
cause these lines to appear as black.
Fineline Pixel Threshold - This parameter specifies the maximum line
width that will be processed as a fine line. The range is 1 - 25.
Contrast - Use this list box to adjust the contrast by specifying an integer
from -10 to +10. A value of "0" means that no contrast adjustment is
applied. Increasingly negative values reduce the contrast of the rendered
image, while increasingly positive values increase the contrast of the
rendered image.
Lightness - Specify the lightness adjustment in this list box. A value of
zero means that no lightness adjustment is applied. Increasingly negative
values reduce the lightness of the rendered image, which darkens the
image. Increasingly positive values increases the lightness of the rendered
image, which further lightens the image.
AccXES Client Tools User Guide
Color
This section is disabled if the default printer is monochrome.
Render Mode - Click on this list box to set the Render Mode for
color printers to color or grayscale. For monochrome printers,
grayscale is the only valid option.
Print Quality Mode - In general, the more bi-directional passes that
the printer makes to create the image, the higher quality the output
will be, but the longer it will take to produce it. The FAST selection is
a single pass bi-directional printing using RACER Technology,
NORMAL is 2-pass bi-directional printing, and BEST is 4-pass bi-
directional printing.
55