Xerox 850DX - Phaser Color Solid Ink Printer User Manual page 57

X Position, Y Position refers to the position of the label based on the
media output. When you stand to the left of the printer, with the printed
document sets coming out of the printer and going to your left, the X and Y
positions are as follows.
L a b e l L o c a t i o n f o r A n y M e d i a S i z e , A n y
R o l l , & L e a d i n g E d g e o f S h e e t = S h o r t E d g e
Y = T o p
X = L e f t
X , Y = C e n t e r
Y = B o t t o m
M e d i a O u t p u t
L e a d i n g
E d g e
L a b e l L o c a t i o n f o r L e a d i n g E d g e o f S h e e t
= L o n g E d g e
Y = R i g h t
X = T o p
X , Y = C e n t e r
Y = L e f t
M e d i a O u t p u t
AccXES Client Tools User Guide
A c c X E S
X = R i g h t
p r i n t e r
T r a i l i n g
E d g e
S t a n d
H e r e
X = B o t t o m
S t a n d
H e r e
If you select Absolute for the X or Y location, then you also need to enter a
number in the text box on the right to represent the absolute distance (inches
or millimeters) from the X or Y edge of the media.
Units – Select "inches" or "mm" as the units to be used when the label is
being positioned.
Rotation - Select the angle of rotation for the label relative to the image.
Size - Select the font point size for the label.
Shading - Enter the percentage of shading for the label. The range is from 0
to 100 percent. A value of 0 is no shading (white) and a value of 100 is all
black.
57