Appendix 1: Creating A .Fin File To Connect To A Folder; Fin File - Creating A File For Your Accxes Client Tools To Connect To The Folder - Xerox 850DX - Phaser Color Solid Ink Printer User Manual

Appendix 1: Creating a .FIN File to Connect to a Folder

IMPORTANT NOTE: The folder must be connected to the printer and on so that the executable file can access the folder to create the correct .FIN file.
FIN File - Creating a file for your AccXES Client To ols to connect to the folder:
Ÿ Go to http://www.xerox.com.
Ÿ Choose Support & Drivers.
Ÿ Go to the Wide Format section.
Ÿ Select the hyperlink that refers to "AccXES 88xx/ X2-Tech/ 510/ 721P".
Ÿ Under your type of driver, select Drivers & Downloads.
Ÿ Select your Operating System and Language. Press the Go button.
Ÿ In the Utilities & Applications section, choose the "Finisher File Creator". Save the zip file to your PC,
Ÿ Open the downloaded .zip file and extract the xesfin.exe file. Save it in the [Install Folder – such as the Program Files]\AccXES\ACT10.0\etc\finisher (or
in the same location where you downloaded your ACT files). The executable file will create the .FIN file as follows.
Ÿ On your PC, go to the downloaded executable file by selecting Start > Run> >cmd.
Ÿ In the Command Prompt window, type in the location of the xesfin.exe file that you downloaded. The following screen illustrates the path of the
xesfin.exe file which was downloaded to the C:\Program Files\AccXES\ACT6.0\etc\finisher folder (see the arrows).
AccXES Client Tools User Guide 79