Updating The Firmware; Updating The Code; Update The Firmware Using The Scsi Bus - Tandberg Data SDLT220-320 INTEGRATION Manual

CHAPTER 7

7.1 Updating the Code

When you need to update the firmware in a drive, you can do it either of two ways:
Build a firmware image tape; this tape can be used in either a manual
•
firmware update or in a Library setting.
Update the firmware over the SCSI bus.
•
Both of these approaches are described briefly in the following subsections.
N : For more information about other diagnostics tools
OTE
provided by Tandberg Data, refer to
Data Diagnostics Tools" on page

7.1.1 Update the Firmware Using the SCSI Bus

SDLT Update is a tool that allows you to update a drive's firmware (using the
SCSI bus), or to create a code update (CUP/FUP) tape for an SDLT drive.
SDLT Update is available on Tandberg Data's web site, http://www.tandberg.com.
Follow the path Support > DLT Support and download the SDLT Update
package. For detailed instructions to use while updating the firmware,
refer to that tool's built-in online help.

Updating the Firmware

Section 1.8, "Tandberg
1-5.