Electrical Specifications; Current And Power Requirements - Tandberg Data SDLT220-320 INTEGRATION Manual

CHAPTER 3

3.1 Current and Power Requirements

Table 3-1 on page 3-2
the tape system (internal and tabletop). The tabletop version requires AC power.
The highest current (and power) is drawn during the native write modes and
backward-read compatibility (BRC) read modes, so they are outlined in
Standby is measured with the tape loaded and tensioned or untensioned, and Idle is
measured with power on with no tape loaded. (The power drawn in these two
modes is similar enough that they are listed together.) Power-up current surges are
less than those encountered during motor accelerations, and so are not listed
separately.
N : In
OTE
to the internal drive, while the AC power values are
relevant to the tabletop drive.

Electrical Specifications

lists the current and power requirements for both versions of
Table 3-1, the current and DC power values are relevant
Table 3-1.