Firmware (Code) Update Troubleshooting - Tandberg Data SDLT220-320 INTEGRATION Manual

7.2.1 Firmware (Code) Update Troubleshooting

This section lists common behaviors that you may notice as you update the tape
drive's firmware. For example:
Updating the same revision
•
If a code update is requested and the code revision being updated is the same
as the code revision already in the unit, the system updates controller code but
not servo-specific code. The steps for this type of update are the same as for a
normal update.
Updating fails, which causes the drive to be reset; the problem can result from
•
any of the following circumstances:
Cartridge contains incompatible update image.
Cartridge does not contain an update image.
No cartridge in the drive.
CHAPTER 7: Updating the Firmware