Secure The Chassis To The Eia Brackets - Intel ISP4400 - Server Platform - 0 MB RAM Quick Start Manual

Secure the Chassis to the EIA Brackets

1. Slide the back of the SRKA4 server system into the rack from the front as shown in Figure 15.
The lip on the chassis is noted by "A" in Figure 15, rests on the brackets.
2. Adjust the chassis so that the slot in each bracket lines up with a hole in the chassis. The
chassis should be centered on the rack.
3. Try to make each bracket flush with the chassis. If necessary, slide the brackets left or right.
4. Using the screws provided in the center-mount kit, attach and tighten a screw through the slot
in the bracket and into the chassis.
Figure 16. Chassis is Secured to Bracket with One Screw Noted by "A"
A
Figure 15. Chassis Slides into the Rack
A
OM09992
OM09993
SRKA4 /ISP4400 Server System 23