Equipment Rack Precautions - Intel ISP4400 - Server Platform - 0 MB RAM Quick Start Manual

Equipment Rack Precautions

WARNINGS
M AC
AIN POWER DISCONNECT
AC power disconnect for the entire rack unit. This main disconnect
must be readily accessible, and it must be labeled as controlling power
to the entire unit, not just to the server(s).
G
ROUNDING THE RACK INSTALLATION
electrical shock hazard, you must include a third wire safety grounding
conductor with the rack installation. If a server power cord is plugged
into an AC outlet that is part of the rack, then you must provide proper
grounding for the rack itself. If server power cords are plugged into
wall AC outlets, the safety grounding conductor in each power cord
provides proper grounding only for the server. You must provide
additional, proper grounding for the rack and other devices installed
in it.
CAUTIONS
Temperature: The operating temperature of the server, when installed in
an equipment rack, must not go below 5 °C (41 °F) or rise above 35 °C
(95 °F). Extreme fluctuations in temperature can cause a variety of
problems in your server.
Ventilation: The equipment rack must provide sufficient airflow to the
front of the server to maintain proper cooling. It must also include
ventilation sufficient to exhaust a maximum of 3,000 Btu's per hour for the
server. The rack selected and the ventilation provided must be suitable to
the environment in which the server will be used.
10 Quick Start Guide
: You are responsible for installing an
: To avoid the potential for an