Configuring The Adaptec Aic-7899 Scsi Adapter; Country Kit Contents; Server Software Kit - Intel ISP4400 - Server Platform - 0 MB RAM Quick Start Manual

Configuring the Adaptec AIC-7899 SCSI Adapter

The Adaptec AIC-7899 SCSI adapter has two busses. Select the bus from the following menu.
Table 5. Main Menu
Menu Item
You have an AIC-7899 adapter in your system. Move
the cursor to the bus:device:channel of the one to be
configured and press <Enter>.
<F5> - Toggle color/monochrome
After selecting the bus, the following menu is displayed.
Table 6. Menu for each SCSI Channel
Host Adapter
AIC-7899 at
Bus:Device:Channel
01:06:A (or 01:06:B)
When you are finished, press <Esc> and make your selection from the following menu.
Table 7. Exit Menu
Feature Option
Exit Utility? Yes
No

Country Kit Contents

Server Software Kit

The server software kit includes the server software kit CD. The CD includes
Product guides
Device drivers
SSU and DPC utilities
Service partition software
FRU and SDR Load utilities
Menu Option
Bus:Device:Channel
01:06:A
01:06:B
Option Comment
Configure/View Host Press <Enter> to view the Configuration Menu.
Adapter Settings
SCSI Disk Utilities Press <Enter> to view the SCSI Disk Utilities
Menu. This menu allows you to format hard
disks and/or verify disk media.
Comment
When you finish configuring your SCSI devices, press <Esc>. Then select
Yes and press <Enter>. When this message appears:
Please press any key to reboot
Press any key, and the server reboots.
SRKA4 /ISP4400 Server System 33