Time Functions Programming; Time Clock Programming; Automatic Relay Activation Time Zones - DKS 1803 Owner's Manual

3.4 TIME FUNCTIONS PROGRAMMING

3.4.1 Time Clock Programming

This programming sequence programs the calendar chip in the telephone entry system for the current
time and date. The calendar chip must be programmed if you are going to use any of the time
functions available with the entry system.

1. Press
2. Enter the current hour and minutes
(24 hour) time format, simply enter the hour (2 digits) and the minutes (2 digits). For
example, 8:30 is entered as 0830 whether it is AM or PM.

3. Press (beep) for AM, or press
4. Enter the month
5. Enter the day of the month
6. Enter the year
7. Enter the day of the week

3.4.2 Automatic Relay Activation Time Zones

This program sequence sets up time zones to automatically activate and deactivate the relays on the
control board. Each relay can be programmed with two independent time zones. Time zones 1 and 2
affect relay 1 operation; time zones 3 and 4 affect relay 2 operation. Use the chart in the appendix to
record the time zones that are programmed. These time zones can be independently turned on or
turned off after they have been programmed (see operating instructions 5.2.5).

1. Press
2. Enter the time zone number

3. Press (beep) to turn the time zone ON, or press
OFF.
4. Enter the beginning hour and minutes

5. Press (beep) for AM, or press
6. Enter the ending hour and minutes

7. Press (beep) for AM, or press
8. Enter the days of the week
the week, enter # in place of the day. For example, to have a time zone active on
Saturday and Sunday only (Sun = 1, Sat = 7), enter 1 7 # # # # #.
9. Repeat steps 2 through 8 to enter additional time zones.

10. Press TOGETHER to end this programming step (beeeeeep).
and enter the four-digit MASTER CODE
BBBB

BB
then press (beep).
BB
then press
BB
then press (beep).
B
(Sun = 1, Sat = 7) then press
and enter the four-digit MASTER CODE
B
then press

BBBB

BBBBBBB
BBBB
then press (beep). Do not use military
(beep) for PM.
(beep).
(beeeeeep).
BBBB
(beep).

(beep) to turn the time zone
BBBB
then press (beep).
(beep) for PM.
then press (beep).
(beep) for PM.
then press (beep). To skip any days of
37
(beep).
(beep).