Entry Code Programming; Four-Digit Entry Code Programming; Delete Individual Four-Digit Entry Codes; Delete All Four-Digit Entry Codes - DKS 1803 Owner's Manual

3.3 ENTRY CODE PROGRAMMING

3.3.1 Four-Digit Entry Code Programming

This programming sequence programs four-digit entry codes into the system memory. The number of
four-digit entry codes that can be programmed is the same as the telephone number memory
capacity, plus 12. We suggest that all entry codes that are programmed into the system be listed with
the names of persons that they have been assigned to (see appendix).

1. Press
2. Enter the four-digit entry code
3. Repeat step 2 to enter additional entry codes.

4. Press TOGETHER to end this programming step (beeeeeep).
3.3.2 Delete Four-Digit Entry Codes

1. Press
2. Enter the four-digit entry code
3. Repeat step 2 to delete more entry codes.

4. Press TOGETHER to end this programming step (beeeeeep).

3.3.3 Delete All Four-Digit Entry Codes

This programming sequence deletes all four-digit entry codes that have been programmed
into the system. CAUTION: this programming step is irreversible once it is started.

1. Press
2. Press
end itself. This will be indicated by a long tone (beeeeeep).

3.3.4 Four-Digit Entry Code Divide Number

The four-digit entry codes can be made to activate either relay 1 or relay 2 by programming a four-
digit divide number. Four-digit entry codes equal to or less than the divide number will activate relay
1. Four-digit entry codes greater than the divide number will activate relay 2. HINT: you can make all
four-digit entry codes (except 0000) activate relay 2 by programming divide number 0000, or make all
four-digit entry codes activate relay 1 by programming divide number 9999.
The factory default divide number is 9999.

1. Press
2. Enter the four-digit divide number

3. Press TOGETHER to end this programming step (beeeeeep).
and enter the four-digit MASTER CODE
BBBB
and enter the four-digit MASTER CODE
BBBB
and enter the four-digit MASTER CODE
then press (beep). This programming sequence will automatically
and enter the four-digit MASTER CODE
BBBB
BBBB
then press (beep).
BBBB
to be deleted and then press
BBBB
BBBB
then press (beep).
35
(beep).
(beep).
(beep).
(beep).
(beep).